Movable Greenhouse Hydroponic Flood Table With Rolling Benches
Product Description
Working principle of greenhouse rolling benches
A sub-irrigation system is essentially a series of pipes and drip
emitters buried beneath a plant's growing medium. Water is pumped
to the bottom of the container where roots find and uptake it. This
is opposed to traditional overhead watering systems where water is
applied to the tops of roots, and flows downwards. Greenhouse
rolling benches can be labor-saving while encouraging both water
and nutrient conservation because water doesn't leach out of the
container or planting box. Additionally, because plants receive
water directly through their roots, this type of irrigation system
using greenhouse ebb and flow benches prevents powdery mildew and
other forms of diseases that form when the stems or leaves of the
plants are overly exposed to water.
The advantages
1. Water tray: U.A. resistant, original ABS plastic cap over a 100%
recycled ABS plastic core; these trays are recyclable.
2. Hand wheel: Manual drive, It's convincing to move the top 60cm
from left to right. The utilize of greenhouse area is upon 50%.
3. The standard height is 75cm and can be adjust up and down 10cm.
4. Heavy-duty bench leg: Hot-dipped galvanized finished, The life
above 20 years.
5. Greenhouse Roling Benches border for the aluminum alloy, reduce
the weight for the frame. Easily to operate and move.
6. All plants are watered simultaneously and evenly providing
better plant growth
7. Crop growth cycle is typically reduced by 1 to 2 weeks
8. Retail areas remain clean and dry and clear of hoses
9. Dry floors and plant foliage make it easier to control relative
humidity
Specification
| Product | Greenhouse Rolling Benches |
| Sizes | 3x6ft, 4x8ft, 4x10ft, 5x10ft, 4x12ft, 5x12ft, Customizable |
| Tray Material | Food grade ABS plastic |
| Tray Thickness | 3mm |
| Frame | Aluminum alloy |
| UV Protective Ability |
Yes |
| Height of Table | 60~80cm |
Feature | 1) Manual drive, ease operation and movement. Greenhouse rolling
benches border for the aluminum alloy, the surface treatment of
steel pipe bracket portion and seed bed networks are hot dip
galvanizing, particularly suitable for hot and humid environment
greenhouse. 2) Plant Trellis Supports are manufactured with galvanized steel to
prevent rusting and corrosion. All greenhouse plant supports
consist of uprights that are attached to the grow bench side rails
and are connected by a rigid cross bar that has a thumb screw on
each upright post for easy height adjustment. 3) The range of Trimming is 300mm, the utilize of greenhouse area
is upon 80%. 4) Anti-tilt device prevent the problem of inclination caused by
emphasis. 5) UV Protective Ability. 6) Using life 10-15 years. |
FAQ
Q. Are the rolling bench can horizontal adjustment?
A: Yes, it can adjust 1-7cm.
Q. What's the weight load of greenhouse rolling bench?
A: Standard is 70-90kg, the weight load can be customized.
Q. What's the height of rolling bench and trays?
A: The standard height of rolling bench is 60-70cm, the inside
height of tray is 7cm, outside height is 9cm.
Q. How do I install the structure or is your company to help us
install it?
A: It is easy to install. We send install video or manual to you.
Or welcome visiting our factory. We will guide you how to install
it in our factory.
