Hydroponics Rolling Bench Agriculture Vertical Growing Ebb And Flow
Plants Grow Table
Product Description
Inspired by nature, greenhouse rolling benches (also referred to as
flood and drain systems, ebb and flow benches or sub-irrigation
systems) means no water logging and no dry periods. Are you
interested in saving water, reducing your labor costs while
improving your crop quality? Our greenhouse rolling benches are
your good choice.
Water is applied to the bottoms of the plants and allowed to travel
upwards to the roots and stems through capillary action. Flood and
Drain benches should be no less than 7 ½ feet long. greenhouse
rolling benches longer than 60 feet will require the polystyrene
ebb and flow tops be assembled in two or more sections.
The advantages
1. Water tray: U.A. resistant, original ABS plastic cap over a 100%
recycled ABS plastic core; these trays are recyclable.
2. Hand wheel: Manual drive, It's convincing to move the top 60cm
from left to right. The utilize of greenhouse area is upon 50%.
3. The standard height is 75cm and can be adjust up and down 10cm.
4. Heavy-duty bench leg: Hot-dipped galvanized finished, The life
above 20 years.
5. Greenhouse Roling Benches border for the aluminum alloy, reduce
the weight for the frame. Easily to operate and move.
6. All plants are watered simultaneously and evenly providing
better plant growth
7. Crop growth cycle is typically reduced by 1 to 2 weeks
8. Retail areas remain clean and dry and clear of hoses
9. Dry floors and plant foliage make it easier to control relative
humidity
Specification
| Product | Greenhouse Rolling Benches |
| Sizes | 3x6ft, 4x8ft, 4x10ft, 5x10ft, 4x12ft, 5x12ft, Customizable |
| Tray Material | Food grade ABS plastic |
| Tray Thickness | 3mm |
| Frame | Aluminum alloy |
| UV Protective Ability |
Yes |
| Height of Table | 60~80cm |
Feature | 1) Manual drive, ease operation and movement. Greenhouse rolling
benches border for the aluminum alloy, the surface treatment of
steel pipe bracket portion and seed bed networks are hot dip
galvanizing, particularly suitable for hot and humid environment
greenhouse. 2) Plant Trellis Supports are manufactured with galvanized steel to
prevent rusting and corrosion. All greenhouse plant supports
consist of uprights that are attached to the grow bench side rails
and are connected by a rigid cross bar that has a thumb screw on
each upright post for easy height adjustment. 3) The range of Trimming is 300mm, the utilize of greenhouse area
is upon 80%. 4) Anti-tilt device prevent the problem of inclination caused by
emphasis. 5) UV Protective Ability. 6) Using life 10-15 years. |
FAQ
Q. Are the rolling bench can horizontal adjustment?
A: Yes, it can adjust 1-7cm.
Q. What's the weight load of greenhouse rolling bench?
A: Standard is 70-90kg, the weight load can be customized.
Q. What's the height of rolling bench and trays?
A: The standard height of rolling bench is 60-70cm, the inside
height of tray is 7cm, outside height is 9cm.
Q. How do I install the structure or is your company to help us
install it?
A: It is easy to install. We send install video or manual to you.
Or welcome visiting our factory. We will guide you how to install
it in our factory.
